2 3
Flexibility:
The default value of this option is [Disabled]. It will allow better tolerance for
memory compatibility when it is set to [Enabled].
Chipset Configuration:
AGP Data Rate:
This allows you to select the AGP data transfer rate between
[8X] or [4X] for an AGP 3.0 card. For AGP 2.0 card, you may select
between [4X], [2X], and [1X]. The default value is [Auto].
AGP Fast Write:
This allows you to enable or disable the feature of AGP fast
write protocol support.
AGP Aperture Size:
It refers to a section of the PCI memory address range
used for graphics memory. It is recommended to leave this field at the
default value unless the installed AGP card’s specifications requires other
sizes.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
AGP Data Rate
AGP Aperture Size
USB Controller
USB 2.0 Support
USB Device Legacy Support
VDDQ Voltage
VCCM Volatge
IDE Driving Strength
ZCLK / AGP / PCI Frequency mode
AGP Fast Write
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Chipset Configuration
Disabled
64M
Enabled
Disabled
1.66V
Auto
Normal
Sync. Mode
Enabled
<Enter> to select the
AGP data transfer rate.
Auto
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
DRAM Access Mode
DRAM CAS Latency
DRAM Precharge Time
DRAM RAS to CAS Delay
DRAM ACT to Precharge Delay
DIMM1 Address / Command Rate
DIMM2, Address / Command Rate
DIMM1 FWDSDCLK Delay
DIMM2 FWDSDCLK Delay
DDR IO Input Termination
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Chipset Configuration
Auto
Auto
Auto
Auto
Auto
2T
2T
Auto
Auto
170 ohms
<Enter> to select the
AGP data transfer rate.
