manualshive.com logo in svg

ASROCK P45TS, Руководство пользователя, Страница: 59 / 68

Поделиться
Скачать
ASROCK P45TS Скачать руководство пользователя страница 59

5 9

5 9

5 9

5 9

5 9

SATAII Configuration

Please select [

Compatible

] when you install legacy OS. If native OS

(Windows 2000 / XP) is installed, please select [

Enhanced

]. Then in the

option “Configure SATAII as”, you are allowed to set the selection to [RAID]
if you plan to enable RAID function. Configuration options: [IDE], [AHCI] and
[RAID]. The default value is [IDE].
If you select [AHCI] or [RAID] mode, the option “Hot Plug” will appear. You
are allowed to use the Hot Plug function under Windows environment if this
option is enabled. Configuration options: [Enabled] and [Disabled].
* RAID option is only supported for P45TS-R.

AHCI (Advanced Host Controller Interface) supports NCQ and
other new features that will improve SATA disk performance
but IDE mode does not have these advantages.

OnBoard IDE Controller

Use this item to enable or disable onboard IDE controller. The default value
is [Enabled].

IDE Device Configuration

You may set the IDE configuration for the device that you specify. We will
use the “Primary IDE Master” as the example in the following instruction.

BIOS SETUP UTILITY

Primary IDE Master

Select the type
of device connected
to the system.

Select Screen
Select Item

+-

Change Option

F1

General Help

F9

Load Defaults

F10

Save and Exit

ESC

Exit

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Advanced

Type

LBA/Large Mode
Block (Multi-Sector Transfer)
PIO Mode
DMA Mode
S . M . A . R . T .
32Bit Data Transfer

[Auto]

[Auto]
[Auto]
[Auto]
[Auto]
[Disabled]
[Enabled]

Device
Vendor
Size
LBA Mode
Block Mode
PIO Mode
Async DMA
Ultra DMA
S.M.A.R.T.

:Hard Disk
:ST340014A
:40.0 GB
:Supported
:16Sectors
:4
:MultiWord DMA-2
:Ultra DMA-5
:Supported

TYPE

Use this item to configure the type of the IDE device that you specify.
Configuration options: [Not Installed], [Auto], [CD/DVD], and [ARMD].

[Not Installed]:

 Select [Not Installed] to disable the use of IDE device.

[Auto]:

Select [Auto] to automatically detect the hard disk drive.

Содержание P45TS





































































Отзывы:

Нет отзывов