ASROCK P45TS страница 39 Скачать руководство пользователя | Manualshive

Страница: 39 / 68

background image

3 9

3 9

3 9

3 9

3 9

STEP 3: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure the RAID function, you need to check theinstallation
guide in the Support CD for proper configuration. Please refer to the document in
the Support CD, “Guide to SATA Hard Disks Installation and RAID Configuration”,
which is located in the folder at the following path:

.. \ RAID Installation Guide

STEP 4: Install Windows

®

XP / XP 64-bit OS on your system. (Windows

®

2000 is

not supported.)

After making a SATA / SATAII driver diskette and using “RAID Installation Guide” to set
RAID configuration, you can start to install Windows

®

XP / XP 64-bit on your system.

At the beginning of Windows setup, press F6 to install a third-party RAID driver. When
prompted, insert the SATA / SATAII driver diskette containing the Intel

®

RAID driver.

After reading the floppy disk, the driver will be presented. Select the driver to install
according to the mode you choose and the OS you install. You may select: "Intel(R)
ICH10R SATA RAID Controller (Desktop - Windows XP)" for Windows

®

XP or "Intel(R)

ICH10R SATA RAID Controller (Desktop - Windows XP64)" for Windows

®

XP 64-bit.

If you want to use “Intel Matrix Storage Manager” in Windows

®

environment,

please install SATA / SATAII drivers from the Support CD again so that “Intel
Matrix Storage Manager” will be installed to your system as well.

After the installation of Windows

®

XP / Windows

®

XP-64bit OS, if you want to manage

RAID functions, you are allowed to use both “RAID Installation Guide” and “Intel Matrix
Storage Manager Information” for RAID configuration. Please refer to the document in the
Support CD, “Guide to SATA Hard Disks Installation and RAID Configuration”, which is
located in the folder at the following path:

.. \ RAID Installation Guide

and the document

in the support CD, “Guide to Intel Matrix Storage Manager”, which is located in the folder
at the following path:

.. \ Intel Matrix Storage Manager Information

2.16.2 Setting Up a “RAID Ready” System

2.16.2 Setting Up a “RAID Ready” System

2.16.2 Setting Up a “RAID Ready” System

2.16.2 Setting Up a “RAID Ready” System

2.16.2 Setting Up a “RAID Ready” System

You can also set up a “RAID Ready” system with a single SATA / SATAII hard disk.
A “RAID Ready” system can be seamlessly upgraded to RAID 0, RAID 1 or RAID 5
at a later date by using RAID migration feature of Intel Matrix Storage. The
following steps outline how to build an Intel “RAID Ready” system.

1. Assemble the system and attach a single SATA / SATAII hard drive.
2. Set up system BIOS as step 1 of page 38. When done, exit Setup.
3. Make a SATA / SATAII driver diskette as step 2 of page 38. Begin Windows

®

setup by booting from the installation CD.
4. At the beginning of Windows

®

setup, press F6 to install a third-party RAID

driver. When prompted, insert the SATA / SATAII driver diskette containing the
Intel

®

RAID driver. After reading the floppy disk, the driver will be presented.

«
...
37
38
39
40
41
...
»

Содержание P45TS





































































Отзывы:

Нет отзывов

Похожие инструкции для P45TS

Бренд: DFI Страницы: 104

Бренд: Zetex Страницы: 8

Бренд: IEI Technology Страницы: 131

Бренд: MSI Страницы: 96

Бренд: A-Trend Страницы: 60

Motherboard DJ800

Бренд: IWILL Страницы: 52

Бренд: Supermicro Страницы: 256

Бренд: IBASE Technology Страницы: 81

Бренд: JETWAY Страницы: 48

Бренд: Honda Страницы: 692

Бренд: Intel Страницы: 26

Бренд: Octek Страницы: 102

Бренд: ON Semiconductor Страницы: 3

Бренд: California Eastern Laboratories Страницы: 34

WAFER-BW-N4-R10

Бренд: IEI Technology Страницы: 136

Бренд: Raisonance Страницы: 46

Бренд: Supero Страницы: 121

Бренд: LiteOn Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды