ASROCK P45DE3, Руководство по установке

Страница: 23 / 121

2 3 2 3 2 3 2 3 2 3
ASRock P45DE3 Motherboard
Using SATA / SATAII HDDs with NCQ function
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen Storage Configuration.
B. Set “SATAII Configuration” to [Enhanced], and then in the option “Configure
SATAII as”, please set the option to [AHCI].
STEP 2: Install Windows
®
Vista
TM
/ Vista
TM
64-bit OS on your system.
Insert the Windows ® Vista TM / Vista TM 64-bit optical disk into the optical drive to boot
your system, and follow the instruction to install Windows ® Vista TM / Vista TM 64-bit
OS on your system. When you see “Where do you want to install Windows?” page,
please insert the ASRock Support CD into your optical drive, and click the “Load
Driver” button on the left on the bottom to load the Intel ® AHCI drivers. Intel ® AHCI
drivers are in the following path in our Support CD:
.. \ I386 (For Windows ® Vista TM OS)
.. \ AMD64 (For Windows ® Vista TM 64-bit OS)
After that, please insert Windows ® Vista TM / Vista TM 64-bit optical disk into the optical
drive again to continue the installation.
2.9 2.9
2.9 2.9 2.9
Untied Overclocking T Untied Overclocking T
Untied Overclocking T Untied Overclocking T Untied Overclocking Technology
echnology
echnology echnology echnology
This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS
setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied
during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.
Please refer to the warning on page 8 for the possible overclocking risk
before you apply Untied Overclocking Technology.
EnglishEnglishEnglishEnglishEnglish