ASROCK N68-GE3 UC Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 58

ASROCK N68-GE3 UC Скачать руководство пользователя страница 33

3 2

3 2

3 2

3 2

3 2

2.15

2.15

2.15

2.15

2.15 Untied Overclocking T

Untied Overclocking T

Untied Overclocking T

Untied Overclocking T

Untied Overclocking Technology

echnology

echnology

echnology

echnology

This motherboard supports Untied Overclocking Technology, which means during
overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you
enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS
setup to set the selection from [Auto] to [CPU, PCIE, Async.]. Therefore, CPU FSB is
untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can
operate under a more stable overclocking environment.

Please refer to the warning on page 8 for the possible overclocking risk before
you apply Untied Overclocking Technology.

NOTE. If you install Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit on IDE HDDs and want to

manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up “SATA Operation Mode” to [RAID] in BIOS first. Then, please set
the RAID configuration by using the Windows RAID installation guide in the following
path in the Support CD:

.. \ RAID Installation Guide

NOTE. For Windows

®

7 / 7 64-bit users, you do not need to load RAID driver from ASRock

support CD. Please use the native driver to install Windows

®

7 / 7 64-bit OS, and then

install ASRock All-in-1 driver.

2.14.2 Installing Windows

2.14.2 Installing Windows

2.14.2 Installing Windows

2.14.2 Installing Windows

2.14.2 Installing Windows

®

®

®

®

®

7 / 7 64-bit / Vista

7 / 7 64-bit / Vista

7 / 7 64-bit / Vista

7 / 7 64-bit / Vista

7 / 7 64-bit / Vista

TM

TM

TM

TM

TM

/

/

/

/

/

Vista

Vista

Vista

Vista

Vista

TM

TM

TM

TM

TM

64-bit With RAID Functions

64-bit With RAID Functions

64-bit With RAID Functions

64-bit With RAID Functions

64-bit With RAID Functions

If you want to install Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit on your SATA /

SATAII HDDs with RAID functions, please follow below steps.

STEP 1: Set Up BIOS.

A. Enter BIOS SETUP UTILITY Advanced screen

Storage Configuration.

B. Set the “SATA Operation Mode” option to [RAID].

STEP 2: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 3: Install Windows

®

7 / 7 64-bit / Vista

TM

/ Vista

TM

64-bit OS on your

system.

This Manual: http://www.manuallib.com/file/2588018

«
...
31
32
33
34
35
...
»

Содержание N68-GE3 UC



























































Отзывы:

Нет отзывов