ASROCK M3A785GMH 128M, Руководство пользователя

Страница: 41 / 62

4 1 4 1 4 1 4 1 4 1
3.3 3.3
3.3 3.3
3.3 OC T OC T
OC T OC T
OC Tweak weak
weak weak
weaker Screen er Screen
er Screen er Screen
er Screen
In the OC Tweaker screen, you can set up overclocking features.
BIOS SETUP UTILITY
Main Advanced H/W Monitor Boot Security Exit
Overclocking may cause
damage to your CPU and
motherboard.
It should be done at
your own risk and
expense.
Select Screen
Select Item
Enter Go to Sub Screen
F1
General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
OC Tweaker
EZ Overclocking
Load Optimized CPU OC Setting [Press Enter]
CPU Configuration
CPU Frequency (MHz)
PCIE Frequency (MHz)
Overclock Mode
[200]
[100]
[Auto]
Spread Spectrum
Advanced Clock Calibration
Processor Maximum Frequency
North Bridge
Processor Maximum Voltage
Maximum Frequency
x10.5 2100 MHZ
x9.0 18
1.2500 V
00 MHz
[Auto]
[Disabled]
Multiplier/Voltage Change
HT Bus Speed
HT Bus Width
CPU Thermal Throttle
[Auto]
[Auto]
[Auto]
[Auto]
EZ Overclocking
Load Optimized CPU OC Setting
You can use this option to load the optiomized CPU overclocking setting.
Please note that overclocking may cause damage to your CPU
and motherboard. It should be done at your own risk and expense.
CPU Configuration
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.], [CPU, PCIE, Async.] and [Optimized].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Spread Spectrum
This item should always be [Auto] for better system stability.
Advanced Clock Calibration
This allows you to adjust Advanced Clock Calibration feature. The default
value is [Disabled]. Configuration options: [Disabled], [Auto], [All Cores] and
[Per Core]. If you select [All Cores], you will see the option “Value (All
Cores)”. Configuration options: [+12%] to [-12%]. If you select [Per Core],
you will see the options “Value (Core 0)”, “Value (Core 1)”, “Value (Core 2)
” and “Value (Core 3)”. Configuration options: [+12%] to [-12%].
Processor Maximum Frequency
It will display Processor Maximum Frequency for reference.
North Bridge Maximum Frequency
It will display North Bridge Maximum Frequency for reference.