ASROCK K8NF4G-VSTA, Руководство по установке

Страница: 18 / 128

1 8 1 8
1 8 1 8 1 8
ASRock K8NF4G-VSTA Motherboard
EnglishEnglishEnglishEnglishEnglish
2.10 2.10
2.10 2.10
2.10 Installing Windows Installing Windows
Installing Windows Installing Windows
Installing Windows
®
2000 / Windows 2000 / Windows
2000 / Windows 2000 / Windows
2000 / Windows
®
XP / Windows XP / Windows
XP / Windows XP / Windows
XP / Windows
®
XP 64-bit / Windows XP 64-bit / Windows XP 64-bit / Windows XP 64-bit / Windows XP 64-bit / Windows
®
Vista Vista Vista Vista Vista
TM TM TM TM TM
Without RAID Functions Without RAID Functions Without RAID Functions Without RAID Functions Without RAID Functions
If you just want to install Windows
®
2000, Windows
®
XP, Windows
®
XP 64-bit or
Windows
®
Vista
TM
on your SATA / SATAII HDDs without RAID functions, you don’t
have to make a SATA / SATAII driver diskette. Besides, there is no need for you to
change the BIOS setting. You can start to install Windows ® 2000, Windows ® XP,
Windows ® XP 64-bit or Windows ® Vista
TM
on your system directly.
2.11 2.11
2.11 2.11 2.11 Installing Windows
Installing Windows
Installing Windows Installing Windows Installing Windows
®
2000 / Windows 2000 / Windows
2000 / Windows 2000 / Windows 2000 / Windows
®
XP / Windows XP / Windows
XP / Windows XP / Windows XP / Windows
®
XP 64-bit / Windows XP 64-bit / Windows
XP 64-bit / Windows XP 64-bit / Windows XP 64-bit / Windows
®
Vista Vista
Vista Vista Vista
TM TM
TM TM TM With RAID Functions With RAID Functions
With RAID Functions With RAID Functions With RAID Functions
If you want to install Windows ® 2000, Windows ® XP, Windows ® XP 64-bit or Windows ®
Vista
TM
on your SATA / SATAII HDDs with RAID functions, please follow the below
steps.
STEP 1: Make a SATA / SATAII Driver Diskette.
A. Insert the ASRock Support CD into your optical drive to boot your system.
B. During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-
ROM as the boot device.
C. When you see the message on the screen, “Do you want to generate
Serial ATA driver diskette [YN]?”, press <Y>.
D. Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press <Y>.
E. The system will start to format the floppy diskette and copy SATA /
SATAII drivers into the floppy diskette.
STEP 2: Set Up BIOS.
A. Enter BIOS SETUP UTILITY Advanced screen IDE Configuration.
B. Set the “SATAII Operation Mode” option from [non-RAID] to [RAID].
STEP 3: Use “RAID Installation Guide” to set RAID configuration.
Before installing Windows
®
2000 to your system, your disk is supposed to
include SP4. If there is no SP4 included in your disk, please visit the below
website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/
spdeploy.htm#the_integrated_installation_fmay