15
Create JBOD
After the system powers on, press <F2> key to enter BIOS setup
utility. Highlight
Advanced
and press <Enter>, then the main interface
of BIOS setup utility will appear. Please set the option
SATA Opera
tion Mode
to [RAID].
After rebooting your computer, wait until you seee the RAID software
prompting you to press <F10>. The RAID prompt appears as a part of
the system POST and boot process prior to loading the OS. You have
a few seconds to press <F10> before the window disappears.
Then, the below window appears.
BIOS SETUP UTILITY
IDE Configuration
Config SATA operation
mode.
Select Screen
Select Item
+-
Change Option
F1
General Help
F10
Save and Exit
ESC
Exit
v02.53 (C) Copyright 1985-2004. American Megatrends, Inc.
Advanced
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
SATA1
SATA2
[Hard Disk]
[Not Detected]
[ATAPI CDROM]
[Not Detected]
[Not Detected]
[Not Detected]
OnBoard IDE Controller
OnBoard SATA Controller
[Both]
[Enabled]
SATA Operation Mode
[RAID]
NVIDIA RAID IDE ROM BIOS 4.81
Copyright (C) 2004 NVIDIA Corp.
Detecting array . . .
0 Healthy NVIDIA JBOD 74.54G
Press F10 to enter RAID setup utility . . .