11
NVIDIA RAID Utility
- Array List -
[Ctrl-X]Exit [
]Select [B]Set Boot [N]New Array [ENTER]Detail
Boot
Id
Status
Vendor
Yes
Array Model Name
2
Healthy
NVIDIA
STRIPING 74.53G
Finally, the
Array List
window appears, where you can review the
RAID arrays that you have set up.
Depending on the platform used, the system can have one or more
channels. In a typical system there is usually one adapter and multiple
channels, and each channel has a slave and a master. The adapter /
channel / master / slave status of each hard disk is given in the Loc
(location) columns of the Free Disks and Array Disks lists. For
example:
1 . 0 . M
M: Master
S: Slave
Controller
Channel - Typically, channel 0 is used for
Parallel ATA drives while channel 1 is used for
Serial ATA drives.
Serial ATA
1 . 0 . M
Channel 1, controller 0, Master
1 . 1 . M
Channel 1, controller 1, Master
