1 0
1 0
1 0
1 0
1 0
Please do not insert both 168-pin SDRAM DIMM and 184-pin
DDR DIMM at the same time. Only use one single type of
DIMMs at one time. Also, for proper operation, it is not
recommended to use two different brands of the DIMMs at the
same time.
Step 1.
Unlock a DIMM slot by pressing the retaining clips outward.
Step 2.
Align a DIMM on the slot such that the notch on the DIMM matches the
break on the slot.
Step 3.
Firmly insert the DIMM into the slot until the retaining clip snap back in
place and the DIMM is properly seated.
2.6 Expansion Slots (PCI and AGP Slots)
2.6 Expansion Slots (PCI and AGP Slots)
2.6 Expansion Slots (PCI and AGP Slots)
2.6 Expansion Slots (PCI and AGP Slots)
2.6 Expansion Slots (PCI and AGP Slots)
There are five PCI slots and one AGP slot on the motherboard.
PCI slots:
PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
AGP slot:
The AGP slot is used to install a graphics card.
The ASRock AGP
slot has a special locking mechanism which can securely fasten
the graphics card inserted.
Installing an expansion card
Installing an expansion card
Installing an expansion card
Installing an expansion card
Installing an expansion card
Step 1.
Before installing the expansion card, read the documentation of the
expansion card and make necessary hardware settings for the
card.
Step 2.
Remove the system unit cover (if your motherboard is already in
stalled in a chassis).
Step 3.
Remove the bracket facing the slot that you intend to use. Keep the
screw for later use.
Step 4.
Align the card connector with the slot and press firmly until the card
is completely seated on the slot.
Step 5.
Fasten the card to the chassis with screws.
Step 6.
Replace the system cover.