2 4
Resource Configuration:
PCI Latency Timer (PCI Clocks):
The default is 32. It is recommended to
keep the default value unless the installed PCI expansion cards’
specifications require other settings.
Primary Graphics Adapter:
Select PCI or AGP as the primary graphics adapter.
Peripheral Configuration:
OnBoard FDC:
Use this to enable or disable floppy drive controller.
OnBoard Serial Port:
Use this to set addresses for the onboard serial ports or
disable serial ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 /
COM1], [2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
OnBoard Infrared Port:
You may select [Auto] or [Disabled] for this onboard
infrared port feature.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
PCI Latency Timer (PCI Clocks)
Primary Graphics Adapter
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Resource Configuration
PCI
32
<Enter> to select PCI
clocks. Leave on
default setting for the
best PCI performance.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
OnBoard FDC
OnBoard Serial Port
OnBoard Infrared Port
OnBoard Parallel Port
Parallel Port Mode
EPP Version
Parallel Port IRQ
Parallel Port DMA Channel
OnBoard Midi Port
Midi IRQ Select
OnBoard Game Port
OnBoard IDE
OnBoard LAN
OnBoard AC' 97 Audio
OnBoard MC' 97 Modem
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Peripheral Configuration
Auto
Disabled
Auto
ECP+EPP
1.9
Auto
Disabled
5
200h
Both
Enabled
Auto
Auto
Auto
Auto
<Enter> to enable or
disable the floppy
drive controller.
