background image

5

1.2  Specifications

 Platform

 MB Dimension

 

- Mini-ITX Form Factor: 

 

  6.7-in x 6.7-in, 17.0 cm x 17.0 cm

 CAP

 

- All Solid CAP

 Fanless

 

- Fan  or Fanless (Depend on GPU used)

 System

 CPU 

- AMD Steppe Eagle SOC

 System Memory

 

- 2 x 204pin SO-DIMM

 

- One Channel

 

- Up to DDR3 1600 MHz

 Display

 

- Embedded ATI Radeon

 (IMB-A182)

 

- DirectX

®

 11.1 graphics support

 

- VGA 

 

- LVDS up to 2-ch/24-bits 1920x1200 resolution 

 

- HDMI 1.4a 

 

- Support Dual Display (any two display devices of VGA, 

 

  LVDS, HDMI)

 Display

 

- Embedded ATI Radeon

 (IMB-A182-H)

 

- DirectX

®

 11.1 graphics support

 

- VGA 

 

- 2 x HDMI 1.4a 

 

- Support Dual Display (any two display devices of VGA, 

 

  HDMI)

 

* when using the two HDMI displays together, one will be true HDMI 

 

  and one will be in DVI mode and does not support audio.

 Ethernet

 

- Dual G-LAN

 

- 2 x Realtek RTL8111G

 Audio

 

- ALC662

 

- Two Jacks on Rear I/O

 

- 3W audio amplifier (Realtek ALC109) supported (with I2C 

 

  interface to control volume)

 Super I/O

 

- NUVOTON NCT6627UD (6 COM ports)

 Expansion 

 

- 1 x Mini- PCIe (half size)

 

Interface 

 

- 1x (PCIex4)

 Watch Dog Timer   

- System reset, 0~255 interval setting in BIOS

 Power on Mode  

- AT/ATX Power on mode supported (setting by jumper)

      

  AT: Directly PWR on as Power input ready

    

  ATX: Press Button to PWR on after Power input ready

 RTC

 

- eKabini embedded

Содержание IMB-A182P








































Отзывы: