30
Deep Sleep
Mobile platforms support Deep S4/S5 in DC only and desktop platforms
support Deep S4/S5 in AC only. The default value is [Disabled].
WAN Radio
Enable/disable the M.2 WiFi connectivity.
BlueTooth Radio
Enable/disable the M.2 BT connectivity.
Active LVDS
Use this to enable or disable the LVDS. The default value is [Disabled].
Set the item to [enable]. Then press <F10> to save the setting and restart
the system. Now the default value of Active LVDS is changed to ENABLE
(F9 load default is also set to ENABLE)
Change the setting from [Enable] to [Disable], and then press <F10> to
save the setting and restart the system. Likewise, the default value of Ac-
tive LVDS is changed to DISABLE (F9 load default is also set to DISABLE)
Panel Type Selection
Use this to select panel type. This item appears when you enable Active
LVDS.
The default values of Active LVDS and Panel Type Selec-
tionwill be changed only when the users manually adjust
them. They will keep at the default values no matter you clear
CMOS, use Instant Flash or press <F9>.
eDP Panel BackLight Brightness
Use this to adjust eDP panel backlight brightness.
Primary IGFX Boot Display
Use this to select primary internal graphics boot display. The default value
is [VBIOS Default].
