22
2.7 Installation of ROM Socket
* Do not apply force to the actuator cover after ic inserted.
* Do not apply force to actuator cover when it is opening over 120 degree, Otherwise, the actuator
cover may be broken.
* The yellow dot (Pin1) on the ROM must be installed at pin1 position of the socket (white arrow
area).
* Make sure the white dot on the ROM is installed outwards of the socket.
* For further details of how to install ROM, please refer to ASRI website.
Warning: If the installation does not follow as the picture, then it may cause severe damage to
chipset & MB.
