background image

31

ATX 12V Power Connector   

Please connect an ATX 12V  

(4-pin  ATX12V1)

 

 

power supply to this connector.

(see p.14  No. 19)

20-Pin ATX Power Supply Installation

Though this motherboard provides 24-pin ATX power connector, it can still work if 
you adopt a traditional 20-pin ATX power supply. To use the 20-pin ATX power 
supply, please plug your power supply along with Pin 1 and Pin 13.

12                                             1

24 

                      13

HDMI_SPDIF Header 

 

HDMI_SPDIF header, providing  

(2-pin HDMI_SPDIF1)

 

 

SPDIF audio output to HDMI

(

see p.14  No. 16)

 

 

VGA card, allows the system to

 

 

 connect HDMI Digital TV/

 

 

projector/LCD devices. Please  

 

 

connect the HDMI_SPDIF 

 

 

connector of HDMI VGA card to  

 

 

this header.

SPDIFOUT

GND

1

Chassis Intrusion Header   

This motherboard supports

(2-pin CI1)

 

 

CASE OPEN detection feature

(see p.14,  No. 11)

 

 

that detects if the chassis cover

 

 

has been removed. This feature

 

 

requires a chassis with chassis

 

 

intrusion detection design.

1

Signal

GND

Содержание H61MV-ITX








































































Отзывы: