ASROCK FM2A88M+ BTC, Быстрое руководство по установке

Страница: 23 / 150

22
English
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
USB 2.0 Headers Besides four default USB 2.0
(9-pin USB45)
ports on the I/O panel, there
(see p.1 No. 20)
are two USB 2.0 headers on
(9-pin USB67)
this motherboard. Each USB 2.0
(see p.1 No. 21)
header can support two USB
2.0 ports.
Serial ATA3 Connectors These eight Serial ATA3
(SATA_1: see p.1, No. 18)
(SATA3) connectors support
(SATA_2: see p.1, No. 19)
SATA data cables for internal
(SATA_3: see p.1, No. 17)
storage devices. The current
(SATA_4: see p.1, No. 16)
SATA3 interface allows up to
(SATA_5: see p.1, No. 15)
6.0 Gb/s data transfer rate.
(SATA_6: see p.1, No. 14)
(SATA_7: see p.1, No. 8)
(SATA_8: see p.1, No. 9)
DUMMY
GND
GND
P+
P-
USB_PWR
P+
P-
USB_PWR
1
SATA_2 SATA_4 SATA_6
SA
T
A_7
SA
T
A_8
SATA_1 SATA_3 SATA_5
USB 3.0 Header Besides two default USB 3.0
(19-pin USB3_2_3)
ports on the I/O panel, there is
(see p.1 No. 7)
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
ports.
1
In
ID
IntA_P3_D-
GND
IntA_
GND
IntA_P3_SSTX-
IntA_
IntA_P3_SSRX-
Vbus Vbus
Vbus
IntA_P2_SSRX-
IntA_
GND
IntA_P2_SSTX-
IntA_
GND
IntA_P2_D-
In
Front Panel Audio Header This is an interface for the front
(9-pin HD_AUDIO1)
panel audio cable that allows
(see p.1 No. 24)
convenient connection and
control of audio devices.
J_SENSE
OUT2_L
1
MIC_RET
PRESENCE#
GND
OUT2_R
MIC2_R
MIC2_L
OUT_RET