ASROCK Fatal1ty X79 Champion Скачать руководство пользователя страница 83

Страница: 83 / 100

3.4.3 South Bridge Configuration

Restore on AC/Power Loss

This allows you to set the power state after an unexpected AC/power loss.

If [Power Off] is selected, the AC/power remains off when the power
recovers. If [Power On] is selected, the AC/power resumes and the

system starts to boot up when the power recovers.

Deep Sx

Mobile platforms support Deep S4/S5 in DC only and desktop platforms

support Deep S4/S5 in AC only. Configuration options: [Disabled], [Enabled
in S5] and [Enabled in S4 and S5]. The default value is [Disabled].

Onboard LAN 1

This allows you to enable or disable the “Onboard LAN 1” feature.

Onboard LAN 2

This allows you to enable or disable the “Onboard LAN 2” feature.

Onboard 1394

This allows you to enable or disable the “Onboard 1394” feature.

Onboard HD Audio

Select [Auto], [Enabled] or [Disabled] for the onboard HD Audio feature. If
you select [Auto], the onboard HD Audio will be disabled when PCI Sound

Card is plugged.

ACPI HPET Table

Use this item to enable or disable ACPI HPET Table. The default value is

[Enabled]. Please set this option to [Enabled] if you plan to use this

motherboard to submit Windows

Vista

certification.

Good Night LED

Use this item to enable or disable Power LED and Lan LED.

Содержание Fatal1ty X79 Champion




































































































Результаты поиска

Содержание Fatal1ty X79 Champion

Отзывы:

ASROCK Fatal1ty X79 Champion, Руководство пользователя, Страница: 83 / 100

Результаты поиска

Содержание Fatal1ty X79 Champion

Отзывы: