8
9
English
2.4 System Rear Panel
2
1
3
5
6
7
WARNING!
Do NOT open the tray if the server
is not powered down or while it is still running.
!
Redundant PSU 3+1: Only one PSU is allowed to be removed while the server is running.
HDD 0
HDD 1
HDD 2
HDD 3
HDD 4
HDD 5
4
No.
Description
1
6 x 2.5" HDD trays
2
I/O Shield (depends on the specification of the server board)
3
Mezzanine Card Support for 1GbE x 2 or 10GbE x2
*Only supported for 3U8G-C612.
4
Low Profile PCI Express Slot (for the riser card)
*Only supported for 3U8G-C612/V.
5
Motherboard Tray Handle*
*WARNING! Please do NOT open the tray if the server is not powered down or while it is
still running.
6
Rear Vent
7
4 x Power Supply Units (Redundant PSU 3+1)
*Server requires 3 working PSUs, with 1 redundant PSU. You must have at least three ac-
tive supplies, installed, functioning and connected to AC. Only one of the PSUs is allowed
to be removed while the server is running.
Содержание BAREBONE 3U8G SERIES
