ASROCK B75M-DGS R2.0 Скачать руководство пользователя страница 40

Страница: 40 / 63

DRAM tRAS

Use this item to change RAS# Active Time (tRAS) Auto/Manual setting.

The default is [Auto].

Command Rate (CR)

Use this item to change Command Rate (CR) Auto/Manual setting. The

default is [Auto].

DRAM tWR

Use this item to change Write Recovery Time (tWR) Auto/Manual setting.

The default is [Auto].

DRAM tRFC

Use this item to change Refresh Cyle Time (tRFC) Auto/Manual setting.

The default is [Auto].

DRAM tRRD

Use this item to change RAS to RAS Delay (tRRD) Auto/Manual setting.

The default is [Auto].

DRAM tWTR

Use this item to change Write to Read Delay (tWTR) Auto/Manual setting.

The default is [Auto].

DRAM tRTP

Use this item to change Read to Precharge (tRTP) Auto/Manual setting.

The default is [Auto].

DRAM tFAW

Use this item to change Four Activate Window (tFAW) Auto/Manual set

ting. The default is [Auto].

DRAM tCWL

Use this item to change CAS# Write Latency (tCWL) Auto/Manual setting.

The default is [Auto].

tREFI

The default is [Auto].

tCKE

The default is [Auto].

tWRDR(DD)

The default is [Auto].

tRWDR(DD)

The default is [Auto].

tRWSR

The default is [Auto].

tRRDD

The default is [Auto].

Содержание B75M-DGS R2.0































































Результаты поиска

Содержание B75M-DGS R2.0

Отзывы:

ASROCK B75M-DGS R2.0, Руководство пользователя, Страница: 40 / 63

Результаты поиска

Содержание B75M-DGS R2.0

Отзывы: