ASROCK AM2NF4G-SATA2, Руководство пользователя

Страница: 7 / 136

7 77 77
ASRock AM2NF4G-SATA2 Motherboard
EnglishEnglishEnglishEnglishEnglish
CAUTION!
1. For power-saving’s sake, it is strongly recommended to enable AMD’s Cool ‘n’
Quiet TM technology under Windows system. See APPENDIX on page 42 of
“User Manual” in the Support CD to enable AMD’s Cool ‘n’ Quiet TM technology.
2. This motherboard supports Untied Overclocking Technology. Please read “Un-
tied Overclocking Technology” on page 20 for details.
3. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 10 for proper installation.
4. Although this motherboard offers stepless control, it is not recommended to
perform over-clocking. Frequencies other than the recommended CPU bus
frequencies may cause the instability of the system or damage the CPU.
5. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the motherboard
functions properly and unplug the power cord, then plug it back again. To
improve heat dissipation, remember to spray thermal grease between the
CPU and the heatsink when you install the PC system.
6. For microphone input, this motherboard supports both stereo and mono modes.
For audio output, this motherboard supports 2-channel, 4-channel, 6-channel,
and 8-channel modes. Please check the table on page 3 for proper connection.
7. Before installing SATAII hard disk to SATAII connector, please read the “SATAII
Hard Disk Setup Guide” on page 17 to adjust your SATAII hard disk drive to
SATAII mode. Besides, you are allowed to downgrade the SATAII hard disk to
SATA hard disk (from SATAII 3Gb/s down to SATA 1.5Gb/s), and connect it to
the SATAII connector. You can also connect SATA hard disk to SATAII connec-
tor directly.
8. Power Management for USB 2.0 works fine under Microsoft ® Windows ®
Vista
TM
/ XP 64-bit / XP SP1 or SP2 / 2000 SP4.
9. Microsoft
®
Windows
®
Vista
TM
driver is not ready yet. We will update it to our
website in the future. Please visit our website for Microsoft ® Windows ® Vista TM
driver and related information.
ASRock website http://www.asrock.com