background image

6 3

6 3

6 3

6 3

6 3

BIOS SETUP UTILITY

Main

Smart

Advanced

H/W Monitor

Boot

Security

Exit system setup
after saving the
changes.

F10 key can be used
for this operation.

Select Screen
Select Item

Enter Go to Sub Screen
F1

General Help

F10

Save and Exit

ESC

Exit

F9

Load Defaults

v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.

Exit

Save Changes and Exit

Discard Changes and Exit
Discard Changes

Exit Options

Would you like to save current setting
user defaults ?

Save 1st User Defaults

Save 2nd User Defaults

Save 3rd User Defaults

Load 1st User Defaults

Load 2nd User Defaults

Load 3rd User Defaults

3 . 8

3 . 8

3 . 8

3 . 8

3 . 8 Exit Screen

Exit Screen

Exit Screen

Exit Screen

Exit Screen

Save Changes and Exit

When you select this option, it will pop-out the following message, “Save
configuration changes and exit setup?” Select [OK] to save the changes
and exit the BIOS SETUP UTILITY.

Discard Changes and Exit

When you select this option, it will pop-out the following message, “Dis-
card changes and exit setup?” Select [OK] to exit the BIOS SETUP UTILITY
without saving any changes.

Discard Changes

When you select this option, it will pop-out the following message, “Dis-
card changes?” Select [OK] to discard all changes.

Would you like to save current setting user defaults?

In this option, you are allowed to load and save three user defaults
according to your own requirements.

Содержание A780GXH 128M

































































Отзывы: