background image

5

1.  Introduction

Thank you for purchasing ASRock 

A55M-HVS

 motherboard, a reliable motherboard 

produced under ASRock’s consistently stringent quality control. It delivers excellent 
performance with robust design conforming to ASRock’s commitment to quality and 
endurance.
In this manual, chapter 1 and 2 contain introduction of the motherboard and step-
by-step guide to the hardware installation. Chapter 3 and 4 contain the con  guration 
guide to BIOS setup and information of the Support CD. 

 

Because the motherboard speci  cations and the BIOS software might  
be updated, the content of this manual will be subject to change without  
notice. In case any modi  cations of this manual occur, the updated ver-
sion will be available on ASRock website without further notice. You may  
  nd the latest VGA cards and CPU support lists on ASRock website as   
well.  ASRock website    http://www.asrock.com

 

If you require technical support related to this motherboard, please visit 
our website for speci  c information about the model you are using.
www.asrock.com/support/index.asp

1.1  Package Contents

ASRock 

A55M-HVS

 Motherboard 

 

(Micro ATX Form Factor: 8.9-in x 8.5-in, 22.6 cm x 21.6 cm)

ASRock 

A55M-HVS

 Quick Installation Guide

ASRock 

A55M-HVS 

Support CD

2 x Serial ATA (SATA) Data Cables (Optional)
1 x I/O Panel Shield

 ASRock Reminds You...

To get better performance in Windows

®

 7 / 7 64-bit / Vista

TM

 / Vista

TM

 64  

bit, it is recommended to set the BIOS option in Storage Con  guration 
to  AHCI mode. For the BIOS setup, please refer to the “User Manual” in  
our support CD for details.

Содержание A55M-HVS





























































Отзывы: