30
2.10 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
1
USB_PWR
P-8
GND
DUMMY
USB_PWR
P+8
GND
P-9
P+9
USB 2.0 Headers
Besides six default USB 2.0
(9-pin USB6_7)
ports on the I/O panel, there
(see p.12 No. 22)
are two USB 2.0 headers on
this motherboard. Each USB 2.0
header can support two USB
2.0
ports.
(9-pin USB8_9)
(see p.12 No. 21)
P-7
P+7
GND
DUMMY
USB_PWR
USB_PWR
P-
6
P+
6
GND
1
Serial ATA2 Connectors
These six Serial ATA2
(SATA_1: see p.12, No. 8)
(SATA2) connectors support
(SATA_2: see p.12, No. 9)
SATA data cables for internal
(SATA_3: see p.12, No. 16)
storage devices. The current
(SATA_4: see p.12, No. 17)
SATA2 interface allows up to
(SATA_5: see p.12, No. 20)
3.0 Gb/s data transfer rate.
(SATA_6: see p.12, No. 19)
Serial ATA (SATA)
Either end of the SATA data
Data Cable
cable can be connected to the
(Optional)
SATA / SATAII hard disk or the
SATAII connector on this
motherboard.
SATA_5 SATA_6
SATA_3 SATA_4
SATA_1 SATA_2
Infrared Module Header
This header supports an
(5-pin IR1)
optional wireless transmitting
(see p.12 No. 24)
and receiving infrared module.
1
I
R
TX
+
5V
SB
D
UMM
Y
I
RR
X
GN
D
