background image

5 7

5 7

5 7

5 7

5 7

4.

4.

4.

4.

4. Sof

Sof

Sof

Sof

Software Suppor

tware Suppor

tware Suppor

tware Suppor

tware Supporttttt

4.1 Install Operating System

4.1 Install Operating System

4.1 Install Operating System

4.1 Install Operating System

4.1 Install Operating System

This motherboard supports various Microsoft

®

 Windows

®

 operating systems: 7 /

7 64-bit / Vista

TM

 / Vista

TM

 64-bit / XP / XP Media Center / XP 64-bit. Because

motherboard settings and hardware options vary, use the setup procedures in this
chapter for general reference only. Refer to your OS documentation for more
information.

4.2 Support CD Information

4.2 Support CD Information

4.2 Support CD Information

4.2 Support CD Information

4.2 Support CD Information

The Support CD that came with the motherboard contains necessary drivers and
useful utilities that enhance the motherboard features.

4.2.1 Running The Support CD

4.2.1 Running The Support CD

4.2.1 Running The Support CD

4.2.1 Running The Support CD

4.2.1 Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD
automatically displays the Main Menu if “AUTORUN” is enabled in your computer.
If  the Main Menu did not appear automatically, locate and double click on the file
“ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.

4.2.2 Drivers Menu

4.2.2 Drivers Menu

4.2.2 Drivers Menu

4.2.2 Drivers Menu

4.2.2 Drivers Menu

The Drivers Menu shows the available devices drivers if the system detects the
installed devices. Please install the necessary drivers to activate the devices.

4.2.3 Utilities Menu

4.2.3 Utilities Menu

4.2.3 Utilities Menu

4.2.3 Utilities Menu

4.2.3 Utilities Menu

The Utilities Menu shows the applications software that the motherboard supports.
Click on a specific item then follow the installation wizard to install it.

4.2.4

4.2.4

4.2.4

4.2.4

4.2.4 Contact Information

Contact Information

Contact Information

Contact Information

Contact Information

If you need to contact ASRock or want to know more about ASRock, welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your
dealer for further information.

Содержание 985GM-GS3 FX


























































Отзывы: