ASROCK 970DE3/U3S3 Скачать руководство пользователя страница 44

Страница: 44 / 53

3.4.4 Storage Configuration

Onboard SATA Controller

This item is for SATA2 ports. Use this item to enable or disable the “Onboard

SATA Controller” feature.

SATA Operation Mode

This item is for SATA2 ports. Use this item to adjust Onboard SATA Opera-

tion Mode. The default value of this option is [AHCI]. Confi guration options:

[AHCI], [IDE] and [RAID].

If you set this item to RAID mode, it is suggested to install SATA ODD

driver on SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports.

SATA IDE Combined Mode

This item is for SATAII_5 (PORT 4) and SATAII_6 (PORT 5) ports. Use this

item to enable or disable SATA IDE combined mode. The default value is

[Enabled].

If you want to build RAID on SATAII_5 (PORT 4) and SATAII_6 (PORT 5

ports, please disable this item.

Onboard SATA3 Operation Mode

This item is for SATA3 ports. Use this item to adjust Onboard SATA3 Op-

eration Mode. The default value of this option is [AHCI]. Confi guration op-

tions: [IDE], [AHCI] and [Disabled].

BIOS SETUP UTILITY

Storage Configuration

Advanced

Onboard SATA Controller

SATA Operation Mode

SATA IDE Combined Mode
Onboard SATA3 Operation Mode

IDE1 Master
IDE1 Slave
SATAII_1
SATAII_2
SATAII_3
SATAII_4
SATAII_5
SATAII_6

[Enabled]

[AHCI]
[Enabled]
[AHCI]

[Hard Disk]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]

Select Screen
Select Item

Change Option

General Help

Load Defaults

F10

Save and Exit

ESC

Exit

Select Screen
Select Item

Change Option

General Help

Load Defaults

F10

Save and Exit

ESC

Exit

Configure onboard
serial ATA
controller.

This Manual: http://www.manuallib.com/file/2587857

Содержание 970DE3/U3S3





















































Результаты поиска

Содержание 970DE3/U3S3

Отзывы:

ASROCK 970DE3/U3S3, Руководство пользователя, Страница: 44 / 53

Результаты поиска

Содержание 970DE3/U3S3

Отзывы: