3 0
3 0
3 0
3 0
3 0
Primary Graphics Adapter
This allows you to select [PCI], [AGP] as the primary graphics adapter. The
default vaule is [PCI].
AGP Aperture Size
It refers to a section of the PCI memory address range used for graphics
memory. It is recommended to leave this field at the default value unless the
installed AGP card’s specifications requires other sizes.
AGP Mode
The default value of this feature is set to [Auto]. If you install an 8X-AGP
card on this motherboard, you may select [Auto], [8X] or [4X] as the AGP
mode. If the installed AGP card is a 4X-AGP card, then you may set the AGP
mode as [Auto], [4X], [2X], or [1X].
AGP Fast Write
This allows you to enable or disable the feature of AGP fast write protocol
support.
AGP 3.0 Calibration
Use this to set AGP 3.0 calibration. Configuration options: [Auto], [Disabled],
[Enabled]. The default value is [Auto].
AGP Straggered Delay
Use this option to select AGP straggered delay. Configuration options:
[Auto], [None], [Delay 1ns]. The default value is [Auto].
AGP GADSTB Output Delay
Use this option to select AGP GASSTB output delay. Configuration options:
[Auto], [None], [Delay 150 psec], [Delay 300 psec], and [Delay 450 psec].
The default value is [Auto].
V-Link Speed
This feature allows you to speed up the V-Link speed. The default value is
[Normal].
PCI Delay Transaction
Enable PCI Delay Transaction feature will free the PCI Bus when the CPU is
accessing 8-bit ISA cards. Disable this feature when using ISA cards that
are not PCI 2.1 compliant.
IDE Drive Strength
This feature allows you to select IDE drive strength among [Lowest], [Low],
[Normal], [Highest]. The default value is [Normal].
IDE Read Prefetch Buffer
This feature allows you to select IDE read prefetch buffer. Configuration
options: [Auto], [Disabled], [Enabled]. The default value is [Auto].
OnBoard LAN
This allows you to enable or disable the onboard LAN feature.
