background image

3 0

password.

Password Check: Select the check point for “Password Check”. Configuration

options: [Setup], [Always]. If [Setup] option is selected, the “Password Check”

is performed before BIOS setup. If [Always] option is selected, the “Password

Check” is performed before both boot-up and BIOS setup.

3. Power Setup Menu

Suspend to RAM: This field allows you to select whether to auto-detect or disable

the Suspend-to-RAM feature. Select [Auto] will enable this feature if the system

supports it.

Repost Video on STR Resume: This feature allows you to repost video on STR

resume. It is recommended to enable this feature under Microsoft

®

 Windows

®

98 / ME.

Restore on AC/Power Loss: This allows you to set the power state after an

unexpected AC/power loss. If [Power Off] is selected, the AC/power remains

off when the power recovers. If [Power On] is selected, the AC/power

resumes and the system starts to boot up when the power recovers.

Ring-In Power On: Use this to enable or disable Ring-in signals to turn on the

system from the power-soft-off mode.

PCI Devices Power On: Use this to enable or disable PCI devices to turn on the

system from the power-soft-off mode.

PS/2 Keyboard Power On: Use this to enable or disable PS/2 keyboard to turn on

the system from the power-soft-off mode.

RTC Alarm Power On: Use this to enable or disable RTC (Real Time Clock) to

power on the system. If [Enable] is selected, you must fill the RTC Alarm Date /

Hour / Minute / Second sub-fields with the actual wake up time you desire.

AMIBIOS SETUP UTILITY - VERSION 3.31a

Main

Advanced

Security

Power

Boot

Exit

Suspend To RAM
Repost Video on STR Resume
Restore on AC / Power Loss
Ring-In Power On
PCI Devices Power On
PS / 2 keyboard Power On
RTC Alarm Power On

RTC Alarm Date
RTC Alarm Hour
RTC Alarm Minute
RTC Alarm Second

[

Setup Help

]

F1:Help

Esc:Exit

F9:Setup Defaults
F10:Save & Exit

+/-:Change Values

Enter:Select

Sub-Menu

:Select Item
:Select Menu

<Enter> to select
auto-detect or disable
the ACPI STR feature.

Disabled
Power Off

Disabled
Disabled
Disabled
15
12
30
30

Disabled

Disabled

Содержание 775i45GV

































Отзывы: