Aspire CombiMotion ACTIV CARE BEB046740, Руководство пользователя, Страница: 6 / 19

11 10 comfimotion.com.au
A range of ComfiMotion Bed accessories are available. In addition to the below listed accessories,
Aidacare specialises in other complimentary products such as foam mattresses, pressure care surfaces,
over bed tables, side lockers and adjustable day chairs. Please contact Customer Service on 1300 133 120
for further information.
CODE DESCRIPTION IMAGE
LONG SINGLE – BEA830120
KING SINGLE – BEA830130
LONG DOUBLE – BEB830132
LONG QUEEN – BEB830134
KING – BEB830136
Allure Headboard
LONG SINGLE – BEA830100
KING SINGLE – BEA830110
LONG DOUBLE – BEB830112
LONG QUEEN – BEB830114
KING – BEB830116
Chesterfield Headboard
BEA830211
Crook Handle Bed Stick
BEA830212
Bed Rail
BEA824200 Aspire ComfiMotion Transport Trolley
BEA830230 Split King Upgrade Kit
BEA830214 Simplified Handset
BEA830213
Partner Handset (used with
Long Double and Long Queen Beds)
WARNING
Do not use accessories that have not been designed for use with ComfiMotion Beds.
5. ACCESSORIES
PLEASE READ THE CRITICAL INFORMATION BELOW:
• Ensure the user, carer and/or equipment is positioned to avoid being trapped
or crushed during bed adjustment.
• Ensure the handset cord is not stretched excessively.
• Ensure the handset and electrical leads cannot become entangled with moving
parts of the bed.
• DISCONNECT the power lead from the mains and stow before transporting the bed.
• If the power lead shows any sign of damage, replace immediately.
UNDERSTANDING THE RELEVANT HANDSET
ComfiMotion Beds are powered by five-to-six electric actuators, which are controlled by the Handset.
Adjustment occurs only while a button is pressed. Adjustment will stop when the button is released,
or the selection reaches the end of its range.
6.1 SETTING UP YOUR HANDSET(S)
NOTE: Handset cable is attached to control box out of factory; this guide is to assist if it becomes
knocked or removed during assembly or if a replacement is needed.
1. Disconnect power to the bed by unplugging from wall socket
2. Disconnect the battery backup from the bed by disconnecting the below plug from the control box
3. Wait 10 seconds for all power to deplete from the control box
4. Disconnect the existing handset(s) from the control box (if replacing) and attach your handset(s)
to the ports shown overleaf
NOTE: only connect handsets in the configurations shown overleaf to avoid electronic system malfunction
5. Route the handset cable(s) carefully to the side of the bed that best suits the user/usage environment
6. Reconnect the battery backup
7. Reconnect power plug to wall socket
8. Wait 10 seconds
9. Conduct the Electronic System Reset procedure (see function 13 in section 6.2 Handset Operation)
to ensure software is calibrated to the new handset
6. SETTING UP AND OPERATING THE HANDSET
WARNING