23
9. MAINTENANCE & STORAGE
To ensure longevity of your Aspire Lifecomfort Aspire Lifecomfort Active Air Acute 8 Alternating
Mattress Replacement, it is very important that it is correctly stored and regularly maintained.
General
• Check mains power cable and plug for any abrasions or excessive wearing
• Check mattress cover for signs of wear or damage
• Check air hoses for any kinks or breakages
Fuse Replacement
• Disconnect the mains power if there is a blown fuse
• Remove the cover on the side casing of the pump
• Remove old fuse and reinsert a new fuse, fix in place with the cover
WARNING!
Only use fuse supplied by your Aspire Dealer, ensuring it has the correct rating and
specification
Air Filter Replacement
• Remove the cover on the rear casing of the pump
• Remove old filter and reinsert a new filter, fix in place with the cover
NOTE:
If the filter does not require replacement, it can be cleaned by being washed gently with a mild
detergent and warm water. Ensure the filter is dry prior to installing back into the pump.
WARNING!
Only use filter supplied by your Aspire Dealer, ensuring it has the correct rating and
specification
Storage
• Release all air from mattress by
OPENING CPR
valve and disconnecting the mattress hose from the
pump
• Lay the mattress out flat & roll from
HEAD
end towards
FOOT
end
• Tighten mattress straps into clamps to prevent mattress unrolling
• Packing strap can then be stretched around the rolled mattress to prevent unrolling.