Aspire ACTIVE AIR ACUTE 8 Series, Руководство пользователя, Страница: 18 / 28

18
Mute
1. Press mute button to nullify all alarms from the pump
2. If issue is not rectified, the mute button will automatically disable and the alarm will reactivate. This
is a safety function to ensure a prompt response when an issue or fault occurs
Auto Protect
Additional air is pump under the mattress pelvic region when the bed backrest angle is raised to prevent
patient bottoming out. This is also referred to as a Fowler Function.
1. Auto protect activates when the bed backrest angle exceeds 25
º
, at this point an additional
10mmHg of pressure is provided by the pump. This additional pressure increases to 15mmHg once
bed backrest angle exceed 45
º
.
2. Once the backrest angle falls back to under 25
º or
45
º
of elevation, the pump will revert to the
previous mode/setting
Auto Adjust
Correct pressure levels are automatically set (dependent on patient weight) when activating the Auto
Adjust feature.
Patients with unusual body shapes may require manual pressure adjustment.
1. Press and hold down the SOFT & FIRM buttons, the LED light will flash and start detecting
correct pressure
2. Once adjusted, the LED light will stop flashing and will remain illuminated indicating the
pressure has been adjusted for the specific patient
3. The mattress pressure can be manually adjusted should the patient desire a different comfort level
lifecomfort
lifecomfort
ACTIVE
AIR 5
FIRM
AUTO
ADJUST
CYCLE TIME
MINUTES
LOW PRESSURE
POWER FAILURE
FLASHING =
CYCLE
ALTERNATING STATIC CLP
PRESS &
HOLD
MODE
AUTO FIRM
POWER
STANDBY
MUTE
SOFT
MAX
CONSTANT
LOW
PRESSURE
ACTIVE
ON/OFF
175
(PRESS BOTH BUTTONS)
lifecomfort
lifecomfort
ACTIVE
AIR 5
FIRM
AUTO
ADJUST
CYCLE TIME
MINUTES
LOW PRESSURE
POWER FAILURE
FLASHING =
CYCLE
ALTERNATING STATIC CLP
PRESS &
HOLD
MODE
AUTO FIRM
POWER
STANDBY
MUTE
SOFT
MAX
CONSTANT
LOW
PRESSURE
ACTIVE
ON/OFF
175
(PRESS BOTH BUTTONS)
1 2