STEP 1: Remove the drawers from the pedestals and desk top: Fully extend the drawer, then press
the plastic tab down on the right and up on the left at the same time as shown below. While
holding the tabs pressed down/up, pull the drawer out.
Plastic Tab
STEP 3: Remove bolts, lock washers and
flat washers from support panel to left
pedestal (3 pcs) and right pedestal (3 pcs).
STEP 2: Remove bolts, lock washers and flat
washers from support panel (2 pcs), left
pedestal (4 pcs) and right pedestal (4 pcs) to
the desk top; Then remove bolts, lock washers,
flat washers from center drawer frame(4pcs) to
pedestals. Take the desk top off.
STEP 4: Replace all of the drawers in pedestals and desk
top: Fully extend the slides from the case. Then align the
slides on the drawer to the slides on the case as shown. Push
the drawer back in. You may have to slide the drawer in and
out several times in order to properly align the ball bearings.
Desk Top
Left Pedestal
Right Pedestal
Left Pedestal
Right Pedestal
Support Panel
06-30-2016
Page 2/2
ITEM NO: ICF-303 66" Exec Desk
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
To dis-assemble desk (If necessary):
Support Panel
To assemble desk
Notes: Please follow the above in the other direction, from STEP 3 to STEP 2 first after the
installation, according to the drawer in the pedestals and the desk top STEP 4.
A
A