aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 1/2
ITEM NO: I597-225 Open Pier
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
FOR INDOOR USE ONLY
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
HARDWARE LIST:
1 PC
No.
A
B
C
D
Description
Sketch
Quantity
Lock Washer
Ø
1/4"
Flat Washer
Ø
1/4" x 3/4"
Allen Wrench 4mm
Bolt
Ø
1/4" x 1-1/2"
8 PCS
COMPONENTS LIST:
No.
1
2
3
Description
Sketch
Quantity
Case
Backer Kit
Floating Shelf
1 PC
1 PC
13 PCS
13 PCS
4
Metal Support
2 PCS
2 PCS
STEP 1: Place the backer kit on the case with the metal support by using 8 bolts(A), lock
washers(C) and flat washers(D) as shown below. If you have a TV console to go with pier,
please leave the 3rd bolt off from top down. Completely tighten all bolts.
E
Bolt
Ø
1/4" x 2-1/8"
4 PCS
06-09-2022
F
G
Bolt
Ø
1/4" x 3/4"
1 PC
"Z" Metal Bracket
1 PC
A
C
D
E
Metal Support
Backer Kit
Backer Kit
Metal Support
TV Console
The 3rd Right Bolt
The 3rd Left Bolt
If you have a TV console to go
with pier, please leave the 3rd
left bolt off when the pier is
sitting at the right of TV
console or leave the 3rd right
bolt off when the pier is sitting
at the left of TV console.
Pier
