7
3. Product Installation
A. Hardware Installation
Cable Connections
Power Jack:
To connect the DC 12V power adapter.
Digital I/O:
Digital In and Digital Out.
Video Output:
The BNC connector allows connect to the analog display to
output analog video for locally monitoring.
Microphone Input (
Pink
): The 3.5mm phone jack allows connect to a passive-type of
microphone, the audio will be heard at the remote site.
Audio Output (Green):
The 3.5mm phone jack allows connect to an amplified
speaker, you can hear the voice of the remote site from the
speaker.
Network Connector:
The RJ-45 connector allows connect the Ethernet cable.
Zoom Adjustment:
This screw is for zooming in and zooming out.
Focus Adjustment:
This screw is for adjusting the focus.
Micro-SD Card Slot:
Insert a Micro-SD card if you want to do the event recording
(video only) in the camera.
Содержание CAM6802T
