6
3. Product Installation
A. Hardware Installation
Cable Connections
Power Jack:
To connect the DC 12V power adapter.
Digital I/O:
Digital In and Relay Out.
Video Output:
The BNC connector allows connect to the analog display to
output analog video for locally monitoring.
Microphone Input (
Red
): The 3.5mm phone jack allows connect to a passive-type of
microphone, the audio will be heard at the remote site.
Audio Output (Green):
The 3.5mm phone jack allows connect to an amplified
speaker, you can hear the voice of the remote site from the
speaker.
Network Connector:
The RJ-45 connector allows connect the Ethernet cable.
Micro-SD Card Slot
(inside of the camera):
Insert a Micro-SD card if you want to do the event recording in
the camera.
1. Connect the cable of Digital I/O, Video output, Audio output and Microphone input if
you want to use these functionalities.
2. Connect Ethernet cable for network connection.
Power Jack (DC 12V)
Digital I/O
Analog Video Output
(Red) Microphone Input
(Green) Audio Output
Network Connector
Содержание CAM646M
Страница 11: ...10 B Monitor Setting 1 Right Click on the desktop Select Properties 2 Change color quality to Highest 32bit...
Страница 15: ...14 1 2 3 4 5 When popup the following dialogue box click Yes...
Страница 31: ...30 After set up click Apply to save the settings...
Страница 35: ...34 C Network Setting Network Setting Network Setting...
