50
I/O Setting
This device provides Digital Input and Digital Output. When the Digital Input is triggered, it
can send the video or snapshot to specific mail address; transmit the video or snapshot to
remote FTP server or Samba network storage; trigger the digital out; record video or
snapshot into local SD card.
Digital Input Setting
Note: If you have selected “Auto (80 meters IR Camera)” in Configuration
Image Setting page, the Digital Input 1 will control the
On/Off of ICR, therefore, the Digital Input 1 will not be used by user and will not
be displayed in this page.
Input 1 Sensor Type:
Select the type of the sensor which connected to the Digital
Input.
[N.O]
means “Normally Opened”, this type of sensor will be triggered when it is
closed.
[N.C]
means “Normally Closed”, this type of sensor will be triggered when it is
opened.
Input 1 Trigger Action:
Select the actions when the Digital Input is triggered.
E-mail: When the Digital Input is triggered, send the recorded video or
snapshot to the specific mail address.
FTP: When the Digital Input is triggered, send the recorded video or snapshot
to the specific FTP site.
Save to Samba: When the Digital Input is triggered, send the recorded video
or snapshot to the Samba network storage.
I/O Setting
Содержание CAM627M
