24
3GPP (Streaming 2) Setting – 3GPP Mode
When configure the streaming 2 as 3GPP mode, it will enable this device to send out
the video in 3GPP format, and you can view the live video on the 3G mobile phone.
The frame rate of streaming 1 is up to 15FPS (NTSC) / 12FPS (PAL) when the 3GPP
mode is enabled.
Since the bandwidth of 3G is not fast usually, recommend set to the following
configuration:
Resolution – Fixed to QQVGA.
Bitrate Control Mode – CBR.
Video Bitrate – 128Kbps or lower.
Video Frame Rate – 5FPS.
Video Format – Fixed to MPEG4.
3GPP Name – Assign “3g” as the name.
To view the live video with a 3G mobile phone or PDA, open “Streaming Player” or
web browser in the mobile phone, type the URL as following to link and view the live
video:
rtsp://<Public IP of camera>:<RTSP port>/<3GPP Name>
* <Public IP of camera>: The public IP address of the camera.
* <RTSP port>: The RTSP port of the camera. This port is assigned in
* <3GPP Name>: The name of the 3GPP video stream.
After set up, click [Apply] to save the settings.
