manualshive.com logo in svg

ASM Polytouch HUDRASYNTH Deluxe, Руководство пользователя

Поделиться
Скачать
ASM Polytouch HUDRASYNTH Deluxe Скачать руководство пользователя страница 41

41

Oscillator mode: WaveScan

This Oscillator mode offers all of the same waveforms as the other mode, but then allows you to 

select up to eight of them in a Wavelist. WaveScan will morph gradually between the positions 

in the Wavelist, using an LFO or some other source through the Mod Matrix.
We’ll list the parameters first and describe them in detail later. Some are also present in the 

Oscillator mode “Single”:

Parameter

Range

Description

Wavelist Edit... (access)

Press Control button 2 to access the list. (See Wavelist Edit 

page below.)

Semi

+/- 36 semitones Coarse tuning of oscillator pitch. Hold [SHIFT] to jump by 

12 semitones.

Cents

+/- 50 cents

Fine tuning of oscillator pitch

WaveScan

1.0 to 8.0 in 

steps of 0.1

Select the starting position of the WaveScan. Hold [SHIFT] 

to jump by whole numbers. An intermediate value morphs 

between two waveforms, as seen in the Left display.

Keytrack

0-200%

Sets keyboard pitch tracking. 0 = fixed pitch; at 200% a 

1-octave difference on the keyboard changes the pitch by 

2 octaves. Default = 100%.

Wavelist Edit page

This lower-level page lets you pick a waveform 

for each of the 8 WAV locations. Options 

include OFF, Silence, and any one of the 219 

waveforms.
The eight WAV slots correspond to the x.0 

positions of the WaveScan parameter on the 

upper page: WAV 1 = position 1.0, WAV 2 = 

position 2.0, etc. A WaveScan value of 1.5, for 

example, is derived by “morphing” halfway 

between WAV 1 and WAV 2. 

Two additional features make waveform 

selection and auditioning very easy:

• Press the corresponding Control button to 

audition that WAV position in isolation.

• Hold [SHIFT] and turn a Control knob to 

change that waveform and all that follow 

it. For example,

• Hold [SHIFT] and turn Control knob 3.
• As WAV 3 selects waveform X, WAV 4 

selects waveform X+1, WAV 5 selects 

waveform X+2, etc.

When a WAV is set to OFF, any WAV after it is treated as if it were located in an earlier 

position. For example, if WAV 7 = OFF but WAV 8 = Pulse4, the Hydrasynth handles 

Pulse4 as if it were WAV 7.

Oscillator 3

Oscillator 3 operates in only one mode (Single), so it does not have the Mode select option in 

edit field 1. See the description of this mode in 

Oscillators 1 and 2 (p. 40)

. 

While creating a patch it can be useful to solo an oscillator to see what it is contributing 

to the sound. This feature is located on the first page of the 

The Mixer Module (p. 48)

.  

Ring & Noise can also be soloed. 

Содержание Polytouch HUDRASYNTH Deluxe




















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды