ASL INTERCOM MPS Series, Руководство по настройке, Страница: 19 / 60

MPS-Series – Configuration Guide
U-0664-0265.doc – Issue: 03 complete, approved
Page 19 of 60
3.3 Downloading a MPS Microphone Configuration
You Will Need:
1) The microphone Configuration Tool (asl-config.exe) and all required dlls (QtCore4.dll, QtGui4.dll,
QtNetwork4.dll and QtXml4.dll)
The host PC must be in the same subnet as the microphone.
2) The microphone configuration file
The configuration file must be named “config.xml” and must be located in the same folder as the
Configuration Tool.
NOTE:
Configuration changes performed from the microphone’s LCD display cannot be retrieved using the
microphone Configuration Tool.
To Configure a Microphone Unit in the System:
1. Set the microphone address as required from the IP SETTINGS menu on the LCD display.
2. Ensure that the host PC IP address is in the same subnet as the microphone.
3. Rename the microphone configuration file to “config.xml” if not already done.
4. Copy the configuration file into the same folder as the Configuration Tool.
5. Ensure that all required dlls (QtCore4.dll, QtGui4.dll, QtNetwork4.dll and QtXml4.dll) are in the same
folder as the Configuration Tool.
6. Connect the host PC and microphone to the Ethernet network.
7. In Windows Explorer, double-click the Configuration Tool executable file.
Figure 2 Microphone Configuration Tool Main GUI
8. Alternatively, you can run the Configuration Tool from a command prompt with additional arguments
which will enable debug/trace information to be displayed in the command prompt window; see
example in Figure 3 (page 20).
Argument Description
–c Displays the results of the configuration file parsing and the checksum verification in
the command prompt window.
–j Displays the configuration commands sent during configuration download in the
command prompt window.
9. Select the required microphone unit from the “ Consoles 1 ” drop-down menu, and then press the “ SET
CONFIG ” button.