P1
P2
P3
P4
Menu
Enter
Start
Stop
THE CONTROL PANEL
Model W6761 has ASKO’s state-of-the-art EasyControl™ panel, as illustrated below. To select a wash program, simply press one of the
preset program buttons then press Start. Refer to “Preset Programs” below for a definition of these programs.
Door Open Button
Press to open the
glass door.
Preset Programs
Press one of these buttons to
select a program.
LCD Window
Displays the wash program, spin speed,
temperature settings, and program run time.
Power Button
Press to turn on
power to the
machine.
Program Selection Controls
These buttons allow you to customize the preset program settings,
such as wash temperatures, spin speed, rinses, display language,
etc. Refer to the Use and Care Guide for instructions.
Power Indicator Light
Glows when the power
is turned on.
Start/Stop Button
Press to start or
stop a program.
Preset Programs
This model has four preset programs, as defined in the table below. To select a program, simply press one of the program buttons then press Start.
Preset
Wash
Spin
# of
Short
Long
Program
Wash Cycle
Types of Laundry
Temp
(1)
Speed
(1)
(2)
Rinses
Spin
Spin
P1
Light wash
Normally soiled loads
140° F
1600 rpm
5
2
yes
P2
Light wash
Normally soiled perma press
105° F
1600 rpm
5
2
yes
P3
Quick wash
Lightly soiled fabrics
105° F
1600 rpm
3
0
yes
P4
Hand wash
Washable silks, nylon, etc.
85° F
800 rpm
3
1
no
NOTES:
(1) You can temporarily adjust the temperature settings and spin speed. (See “Temporary Program Changes” below.)
(2) These are the maximum spin speed settings allowed for the program.
Temporary Program Changes
You can make temporary changes to the wash temperature and/or spin speed on the preset programs. Simply press the button for the preset
program you want to use then follow the instructions below. The settings will revert to normal at the end of the program.
Temperature – Press
until the desired temperature displays in the LCD window. (The options are 85°, 105°, 120°, 140°, 160°, 175°, and
205°.) If you also want to change the spin speed, read the following paragraph, otherwise, press Start.
Spin Speed – Press
until the desired spin speed displays in the LCD window then press Start. (The spin speeds advance in 200 rpm
increments.)
You can easily customize the preset programs to best fit your laundry needs. See “Customizing the Preset Programs” in your Use and Care Guide.
Power Button
The Power button turns the power to the machine on and off. When the power is on, the power indicator light glows red. The power must be
on before you can open the glass door, set the programs or start the machine.
Start/Stop Button
Once you’ve selected a program and options, press this button to start the washer. You also press this button to stop the washer during a
program. (See “Interrupting or Cancelling a Program” on the next page.)
Door Open Button
When the washer has completed a program, press this button to open the glass door. Please note that the power must be on and the washer
drained to open the door.
We know you’re excited about owning an ASKO washing machine and you’re anxious to get started, so here is a brief summary of the
operating procedures. To get the most of the features of your machine, we recommend that you read your Use and Care Guide.
Washer Quick Start Guide
9$%$
