Asko ODV8127 Series, Инструкция по эксплуатации

Страница: 10 / 20

Before first use
WARNING!
Make sure that during installation, the transport cover was removed, the oil filter was installed
and that the appliance was mounted according to the installation instructions.
Operation
Operate the vacuum drawer with the control panel on the top of the drawer.
1. Push the drawer in somewhat and slide it out of the cupboard.
2. Switch on the drawer with the On/Off touch key. Press the On/Off touch key until the device is
switched on.
3. Open the lid and place a vacuum sealer bag in the vacuum chamber (see ‘Positioning a vacuum
sealer bag’).
4. Close the lid.
5. Set the vacuum level with the Vacuum Level touch key (see ‘Vacuuming’).
• The 3 indicator lights display the vacuum level.
• The lights flash and diminish during vacuuming.
6. Set the vacuum closure time (sealing time) with the ‘Sealing Time’ touch key (see ‘Vacuuming’).
• The 3 indicator lights display the sealing time.
• The lights flash and diminish during sealing.
7. Press the Start touch key to start the vacuuming process.
8. Immediately afterwards, shortly press on the front of the lid so that the vacuum chamber
can vacuum.
10
Operation