Asko DBI243IB, Руководство по эксплуатации

Страница: 9 / 28

2:15 Eco
Starting the dishwasher
Select a program mode
Select any options
Press and hold the main power switch until the display lights up.
Select the program
The main power switch
Open the door and press the main power switch. Close the door. Also
turn on the water tap if it is turned off.
Select a program
To select a program, press the navigation button until the desired
program is shown on the display.
Select a programme to suit the type of dishes and how dirty they are.
Eco
Use when you want to save water and energy. For normally soiled load,
such as plates, serving dishes, cups, glasses and so on.
You can read more about greener dishwashing in the chapter Loading
the dishwasher.
Heavy
Use to wash normally soiled load, such as plates, serving dishes, cups,
glasses and so on.
Time program
The program adapts to the specified running time or finish time. With
this program it is important to choose a time suited to how dirty the
dishes are.
Slightly dirty dishes 0:15-0:45
Normally dirty dishes 1:00-1:30
Very dirty dishes 2:00-2:30
Press the option button to set the desired program time.
Rinse & hold
Used to rinse dishes while you wait for the dishwasher to become fully
loaded.
Hygiene
This program is designed to meet strict hygiene demands.
Quick
A short program for slightly soiled dishes. (This program is not intended
for burnt food, such as on oven dishes.)
Intensive
Program for very dirty dishes, such as pans, casserole dishes and
oven dishes. If these dishes do not completely fill the dishwasher, you
can add plates and the like.
Select a program mode
To select a program mode, press the program mode selector until the
desired mode is shown on the display. The available program modes
vary between programs.
Speed mode
The program time is shortened, but the dishwasher uses more energy.
Night mode
Lower noise level during the dishwashing program. The program time
is extended.
Select an Option
To select an option, press the option button until the desired option is
shown on the display. The available options vary between programs.
Extra Dry
A higher temperature in the final rinse and a longer drying cycle
improve the drying results if you activate this option. Energy
consumption is slightly increased.
Delayed Start
When you select Delayed Start, the dishwasher will start in 1-24 hours
after you have pressed the button Start/Stop and closed the door.
1. Press the button once to activate Delayed Start. Press the button
several times – or hold it in – to set the desired number of hours.
2. Press Start/Stop and close the door. The timer counts down and
the dishwasher starts after the selected delay.
If you want to cancel the Delayed Start option, open the door then
press and hold Start/Stop for three seconds.
START
STOP
Starting the dishwasher
Close the door properly, otherwise the dishwasher will not start. Press
Start/Stop until the display shows "Program started".
If the dishwasher is not started within 2 minutes of the last button press,
the machine switches off.
9