Asko DBI243IB, Руководство по эксплуатации

Страница: 4 / 28

Before washing for the
first time
1. Checking water hardness
Contact the local water utility to check the water hardness in your area.
This is important with regard to how much detergent and rinse aid to
use.
2. Basic settings
Open the door and press the main power switch.
" Welcome to your ASKO. First time set-up. " is shown on the display.
It is important that you choose the right settings to ensure good
dishwashing results.
English
Main power switch
Confirm setting Select setting
Settings
Language 1.
Select the language to be shown on the display.
Set level of rinse aid 0/1/2/3/4/5 2.
By using rinse aid you will improve your drying result. You will also
achieve a better dishwashing result with glassware and dishes.
Select rinse aid dosage. The rinse aid dispenser can be adjusted
between 0 (Off) and 5 (High dosage).
Pre-selected at factory: 5
Top up rinse aid
Press to open
1. Open the rinse aid compartment lid.
2. Carefully top up with rinse aid to the level marked max .
3. Wipe up any splashes of rinse aid around the compartment.
4. Close the lid firmly.
For water with a hardness greater than 10–12 °dH, you ought to use
rinse aid with citric acid (known as acid rinse aid).
To change the chosen setting, see the chapter Settings.
4