THE CONTR
THE CONTR
THE CONTR
THE CONTR
THE CONTROL P
OL P
OL P
OL P
OL PANEL
ANEL
ANEL
ANEL
ANEL
We know you’re excited about owning an ASKO dishwasher and you’re anxious to get started, so here is a brief summary of the
operation procedures. The page references in this Guide refer to the
Use and Care Guide. To get the most out of your dishwasher’s
features, we recommend that you read the
Use and Care Guide.
For normally soiled loads, such as
plates, glasses, bowls, and lightly
soiled pans.
CHANGING A PROGRAM
CHANGING A PROGRAM
CHANGING A PROGRAM
CHANGING A PROGRAM
CHANGING A PROGRAM
If you decide to change the program after you have started the machine, simply turn the control knob to the desired program. The
machine will drain so the new program will start with clean water.
AMOUNT OF DISHWASHING DETERGENT TO USE
AMOUNT OF DISHWASHING DETERGENT TO USE
AMOUNT OF DISHWASHING DETERGENT TO USE
AMOUNT OF DISHWASHING DETERGENT TO USE
AMOUNT OF DISHWASHING DETERGENT TO USE
We recommend that you use only unscented, granular automatic dishwashing detergent. Generally, one tablespoon of detergent is
needed for a normal wash load. More heavily soiled items, however, may need more detergent. Also, the amount of detergent
needed can vary due to differences in water hardness. The harder the water, the more detergent you may need. (See page 5.) In any
case, you should never use more than three tablespoons of detergent.
Quick Start Guide
PROGRAMS AND OPTIONS
PROGRAMS AND OPTIONS
PROGRAMS AND OPTIONS
PROGRAMS AND OPTIONS
PROGRAMS AND OPTIONS
To select a program, simply turn the control knob to the appropriate program number. Choose Temperature selection and Heated
fan dry by pressing or releasing the buttons, as indicated on the control panel.
For the heaviest soiled loads, such as
pots, pans, casseroles, etc.
This program rinses the dishes. Select
Heated fan dry if you also want them
heat dried.
For lightly soiled loads that are washed
immediately after use. This program is
good for delicate items, such as fine
china and crystal, but you should set the
Temperature selection to Lo and the
Heat dry to Off.
To rinse dishes that you plan to wash
later that day.
If this button is set on Hi (released), the main
wash and final rinse are heated to 150° F. If it is
set on Low (depressed), the main wash and final
rinse are heated to 130° F.
1 Rinse and hold
2 Pots and pans
4 Light wash
5 Rinse
This program activates the heating
element to warm the dishes.
6 Plate warm
3 Normal wash
Temperature
Selection
Releasing this button activates the heating
element for a short period after the final rinse to
dry the dishes faster.
Heated
fan dry
Model 1385
Options
Programs
Hi
Lo
On
Off
Temperature
selection
Heated
fan dry
Rinse and hold
Pots and pans
Normal wash
Light wash
Rinse
Plate warm
1
2
3
4
5
6
6
5
3
4
2
1
