46
General Characteristics
The
Askaynak Inverter 205-TIG/PULSE
is an TIG and MMA welding machine manufactured using the
latest inverter technology. Power source unit with inverter, is a technology that is introduced to the market
in 1980s. 50Hz/60Hz frequency is converted to 20 KHz or above, which means high frequency, by IGBT
and then voltage is decreased and alternating current (AC) is converted to direct current (DC), a powerful
DC source current is created by using PWM technique in inverter technology, the size and weight of the
welding machine is decreased and the efficiency is increased by 30% with inverter technology. The most
important specifications of the welding machines that is produced with inverter technology are providing
stabile arc, safety, lightness and energy saving. The improvement of welding machines with inverter is
called a revolution in welding area by experts.
The
Askaynak Inverter 205-TIG/PULSE
is a shielded electrode and TIG welding machine features
igniting with HF (high frequency), start current, crater arc current, welding current, base current, duty ratio,
upslope time, downslope time, pre-gas, post-gas, pulse frequency, hot start and arc force etc.
The
Askaynak Inverter 205-TIG/PULSE
is suitable for welding for various plates made of stainless steel,
carbon steel, alloyd steel, titanium, magnesium, cuprum, etc, which is also applied to pipe installment,
mould mend, petrochemical, architecture decoration, car repair, bicycle, handicraft and common
manufacture.
The advantages offered by the
Askaynak Inverter 205-TIG/PULSE
welding machine are:
1- It reduces the IGBT switching loss with soft switching technology.
2- DC Pulsed TIG and MMA, adopt IGBT and advanced PWM technology
3- High performance MCU, Digital control, Digital display
4- Preset all parameters with hold process
5- Intelligent protection: over-voltage, under-voltage, over-current, over-heat
6- Light and easy to carry, simple installation.
Input
Power Factor : 1.00
Height
280 mm
Width
155 mm
Length
465 mm
Weight
14.7 kg
Duty Cycle
(10 minutes period)
% 25 MMA %30 (TIG)
% 60
% 100
Output Voltage
(Volt)
28.0 V (MMA) / 18.0 V (TIG)
25.2 V (MMA) / 14.8 V (TIG)
24.0 V (MMA) / 14.0 V (TIG)
Output Current
(Amper)
200 A (MMA / TIG)
130 A (MMA) / 120 A (TIG)
100 A (MMA / TIG)
Welding Current Range
5 - 200 A
Maximum Open Circuit Voltage
60 V (DC)
Output Range
Welding Current Output Rates
Supply Cable: 3 x 2.5 mm
2
Operation Temperature between –10°C and +40°C
Physical Dimensions
Insulation Class : F
Pollution degree : 3
Input Voltage
220 V ± % 10 / 1 Phase
Frequency
50/60 Hertz (Hz)
Power Consumption
7.0 kW (MMA) (25 % operation cycle)
4.6 kW (TIG) (30% operation cycle)
U
S
E
R
MAN
U
AL
