manualshive.com logo in svg

ashtech Reliance FS/2, Руководство по эксплуатации

Поделиться
Скачать
ashtech Reliance FS/2 Скачать руководство пользователя страница 54

38

 Reliance with FS/2 Field Operations Manual

7.

Press F4 (NEXT) to go return to the point Feature Logging screen.

8.

Select the next point to log and press F4 (LOG) or press F1 (ENDM) to exit 
multipoint mode and return to the Feature Logging screen.

Logging a Line

1.

Start FAMlog, and call the GIS Main Menu, Figure 3.12.

2.

Press F2 (FEAT). The Feature Logging (FEAT) screen appears, as shown in 
Figure 3.13.

3.

Use the up/down arrows to highlight the line feature you want to annotate, 
and press F4 (LOG).

An attribute menu appears listing attributes you can assign to the feature. 

4.

Enter or select the requested attribute information using the key pad and 
press F4 (OK).

The Attribute menu indicates the attributes just entered.

5.

Move the antenna along the line feature.

6.

After defining the line feature, press F4 (STOP) to stop logging.

FAMlog returns to the Feature Logging screen.

When logging data for a line feature, Time begins at 0:00 when the LOG key is pressed and counts 
forward; the opposite of point logging.

Logging an Area

1.

Start FAMlog, and call the GIS Main Menu,  Figure 3.12.

2.

Press F2 (FEAT). The Feature Logging screen appears, Figure 3.13.

Содержание Reliance FS/2



























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды