ashtech HDS800, Справочное руководство

Страница: 659 / 678

643
Other Procedures & Memos
Downloading Raw
Data
Use a USB mass storage device as a transit storage medium
to download raw data files from the receiver’s internal
memory to your office computer.
Important! During a download operation, files are not deleted
from the receiver but simply copied to the USB mass storage
device.
After downloading the files to this device, connect the USB
device to your computer and use your usual browser to copy
the files to the project folder.
Using a USB Mass Storage Device
• Connect the USB mass storage device to the receiver via
the short USB Host-to-Device cable provided (P/N
702104).
If raw data files are present in the receiver’s internal
memory, the following icons will automatically appear on
the display screen:
• To confirm the file transfer, press the Log button. The
General status screen will re-appear after the file transfer
is complete.
• To cancel the file transfer, press the Scroll button.
• If you do not press any button within the next 10 seconds,
the download procedure will be canceled automatically
and the screen will come back to the previous display.
Using the USB Cable Provided
• Connect the USB cable provided (P/N 702103) between
the office computer and the receiver’s USB port. The
receiver is then seen as a USB device from the office
computer
• Using Windows Explorer on your office computer, browse
the receiver’s internal memory for the raw data files.
• Copy/paste the files to your project folder. Note that raw
data files can directly be deleted from the receiver’s
internal memory through this connection.