ashtech HDS800, Справочное руководство

Страница: 658 / 678

642
Other Procedures & Memos
NETwork Record
Below is an example of a network record. The table below
describes the syntax used.
NET;ascos;Ruhrgas AG;B;N;http://www.ascos.de;none;http://igs.ifag.de/
root_ftp/software/NtripRegister.doc;none
Logging Raw Data
Starting/Stopping
Raw Data Logging
You simply need to use the Log button to start and stop raw
data logging. Later, you will however need to do the following
manually:
1. Downloading phase (if appropriate, rename the raw data
files collected on each site).
2. Post-processing phase: Manually correct all computed
elevations for the antenna height.
By default, raw data is logged to the receiver’s internal
memory. The Raw Data Logging icon on the General Status
screen will start flashing when a raw data file is open for
logging.
Record Parameter Meaning Format
NET Header for “network of data streams” 3 characters
ascos
Network identifier, e.g. name of a net-
work of GNSS permanent reference
stations
Undefined number of
characters
Ruhrgas AG
Name of institution, agency or com-
pany operating the network Undefined number of
characters
B
Authentication required (access pro-
tection):
N=None
B=Basic
D=Digest
1 character: “N”, “B” or
“D”
N
User fee:
N=No user fee
Y=Usage is charged
1 character: “Y” or “N”
http://www.ascos.de Web address for stream information
Undefined number of
characters
ttp://igs.ifag.de/root_ftp/
software/NtripRegis-
ter.doc
Web address or mail address for regis-
tration Undefined number of
characters
none Miscellaneous information
Undefined number of
characters