ashtech HDS800, Справочное руководство

Страница: 480 / 678

464
Query Command Library
CST: NTRIP Caster Parameters
Function
This command is used to query the receiver for the current
NTRIP caster settings.
Command Format
Syntax
$PASHQ,CST[*cc]
Response Format
Syntax
$PASHR,CST,s1,s2,d3,s4,d5,s6,s7,s8,f9,f10,s11,d12,s13,s14,c15,s16,s17,
s18[*cc]
Parameters
Parameter Description Range
s1 NTRIP caster status ON, OFF
s2 IP address of the NTRIP caster. 100 characters max.
d3 IP port number of the NTRIP caster 100-65535
s4
NTRIP caster password. This password is
used by NTRIP servers (data sources) to con-
nect to the NTRIP caster.
32 characters max.
d5
Number of simultaneaous connections per
user.
1-100
s6
NTRIP caster identifier. Use this field to pro-
vide more information describing/identifying
the NTRIP caster.
100 characters max.
s7
NTRIP caster operator: Name of the institu-
tion, agency or company running the caster.
100 characters max.
s8 Country code 3 characters
f9 Latitude in degrees. ±90.00
f10 Longitude in degrees. 0.00 to 359.99
s11
Fallback caster IP address. (Fallback caster:
the caster where to connect to in case this
one breaks down).
128 characters max
d12 Fallback caster IP port number 100-65535
s13
Network identifier, e.g. name of a network of
GNSS permanent stations.
100 characters max
s14
Network operator: Name of the institution,
agency or company running the network.
100 characters max
c15
Fee indicator:
• Y: Usage is charged
• N: No user fee
Y, N