ashtech HDS800, Справочное руководство

Страница: 100 / 678

84
Using the Web Server
•
Mode
: Specify the role played by the base in the IP
connection (server or client).
•
Protocol
: Select the protocol that will be used in the IP
connection (“TCP” or “UDP”). “TCP” should be chosen
preferably. In cases where you need to output data at a
very high update rate, UDP may be used instead.
•
IP Address
: (A valid field only if the base is used as the
client) Enter the IP address of the system (rover) that will
acquire the data stream.
•
IP Port
: Specify the IP port of this system.
•
Message Type
: Specify the type of data message the
receiver will deliver on this port (ATOM, RTCM, CMR,
CMR+ or DBEN). Click on the “I” symbol to the right of
this field to read the details of the selected message type.
• After you have defined all the ports used, click on the
Configure
button to let the Web Server load all your new
parameters to the receiver. You have now reached the end
of the configuration phase.
Creating an Account on Dyn.com
Dyn Standard DNS is an update mechanism, offered by
Dynamic Network Services, Inc. , through which you can make
sure the hostname of your HDS800 will always match the
dynamic IP address assigned to it by your Internet provider.
This however requires that you create an account and choose
the function you want to use.
Do the following to create an account:
• Open a new tab in your web browser.
• Type http://dyn.com/dns/ and press ENTER.
• Type on the Sign In button in the upper-right corner.
• Type on the “Create Account” link.
• Enter your credentials (username, password and email)
and other information needed (safety number,
registration, policy agreement).
• Click on Create Account . You will then receive an email
containing a link allowing you to activate your account.
• Click on this link. This will open the DynDNS web site on
which you will be logged in after you have re-entered your
password. This confirms the creation of your account.
• Click on “Create Free Hostname”.
• Choose a name for your HDS800 (hostname), keep “Host
with IP address” selected, and enter the current IP