INSTALLATION
9.Make sure the control knob is in the
"OFF" position. Unscrew the push button
cap on the ignition module located on the
control panel to access the Battery(G)
compartment. The ignition module requires
one心size Battery (G).
10. Turn the cylinder valve on the tank
clockwise to close the propane tank.
Attach the preassembled regulator to
the cylinder valve by turning the
regulator coupling nut clockwise.
Make sure it is fastened securely and
tighten connections by hand only.
Open the tank valve. Apply a solution
of soapy water to the tank-regulator
connection and to the valve-hose
connection to check for leaks. If soap
bubbles continue to form, the
connection has a leak. If a leak is
found, close the tank valve and tighten
all connections. NEVER USE A
FLAME TO CHECK FOR LEAKS.
11.Cover the fire pit with the PVC cover (F)
when not in used to protect the unit from the
elements. The fire pit must be allowed to
COMPLETELY cool after use before
covering.
P1
8
7-77
6
CYLINDER VALVE
II
它
BLACK COUPLING NUT
turn c|ockwiseto connect\
REGULATOR \
\
�
勹勹
PRESSURE
RELIEF VALVE
Page14of17
F
